Miller FieldPro Smart Feeder CE, Owner'S Manual

Page: 29 / 56

OM-264234 Page 23
6-1. Controls (Continued)
12 Memory Card Save Button
Press this button to save machine configuration to memory slot. The memory card busy LED illuminates during the following conditions: storage/re-
trieval of operator settings, usage of custom MIG type weld process, and firmware upgrades. The memory CARD text will illuminate when custom MIG
or TIG type weld process data is currently being used from the memory card.
13
Memory Card Load Button
Press this button to load a previously saved configuration file from the memory card in the card slot. This operation allows restoring previously saved
operator settings on the card to memory locations 1-4. The busy LED will illuminate to indicate the load operation is in progress.
14
Wire Type Select Button And Indicator
Press this button to select the desired wire type (CARBON, CARBON METAL CORE or STAINLESS steel). The text illuminates to indicate the active
wire type selected. This selection is required for all MIG process types except FCAW.
15
Gas Type Select Button And Indicator
Press this button to select the desired shielding gas. This button will cycle through and illuminate only the available gas selections in one particular
column of the gas table based on the selected MIG process and WIRE TYPE and WIRE DIAMETER. The text illuminates when any MIG process is
selected except FCAW.
16
Wire Diameter Select Button And Indicator
Press this button to select the electrode diameter used for the selected MIG process. Possible selections include 0.035 in. (0.9 mm), 0.040 in. (1.0 mm)
and 0.045 in. (1.2 mm). The wire diameter text will illuminate to show the selected wire diameter.
17
Memory Card Indicator
The memory card text will illuminate when custom MIG process data is being used.
18
Memory Card Busy Indicator
The memory card busy LED will illuminate during the following conditions: storage/retrieval of operator settings, usage of custom MIG type welding
process data, and firmware upgrades.
Notes