40
Changing Bagger To Transport Position
Raise Conveyor Up For Transport (Manual)
Using the hand winch on the side of the conveyor, raise the conveyor all the way up. Rotate the
transport lock and allow it to seat itself in the locking hole of the conveyor.
IMPORTANT: When raising the conveyor, rotate the transport lock to the lock position. Trans-
port lock is spring loaded and will lock into the transport hole in the conveyor once conveyor
is all the way up. Be sure lock is properly seated before transporting.
Conveyor
Winch
Transport Lock
Raise Conveyor Up For Transport (Hydraulic)
1. The tractor PTO must be engaged before operating the hydraulic conveyor raising/lowering con-
trol.
2. Pull the control lever toward you to raise the conveyor. The control lever will return to the cen-
tered (neutral) position when released.
3. Raise the conveyor all the way up before transporting the bagger.
Hydraulic Control
Lever
