Instruction Manual
Page 26
10.0
Technical Requirements
CHAPTER 10
TECHNICAL REQUIREMENTS
Technical Requirements
1. Total air pressure should be 120 psi (8.3 bar).
2. The pressure of the Upper Unit Weld Wheel should be between 5 psi and 60
psi (.2 bar and 4.1 bar).
3. The lifting of the Upper Weld Roller must be smooth and free, without obvious
vibration.
4. When the Upper/Lower Weld Rollers are aligned properly, the edges of the two
rollers should be parallel and aligned.
5. Heat System Swing: The swing in/out of the heat system should be smooth
and natural at moderate speed.
6. Air lines and air fittings should be free of leaks.
NOTE: Changes in factors such as thickness of materials, qualifications of the op-
erators and different environment and weather may directly affect the product. The
operator should be able to understand the following adjustable factors particularly:
1. Heating Temperature
2. Air Pressure
3. The pressure of the Upper Weld Roller
4. Air volume
5. Placement of heating system
