Instruction Manual
Page 15
8.0
Maintenance
CHAPTER 8
MAINTENANCE
1. Loosen and remove the protective cover from the element
housing.
2. Unpack the fiberglass insulation around the front of the
element housing. Be cautious to avoid eye contact when
handling the insulation.
3. Loosen and remove the two bolts to the bracket holding
the element housing in place.
4. Remove the bolt securing the element in the housing.
5. Loosen the 2 upper set screws (1 on each side) on the
element securing the electrical leads and remove the
leads.
6. Pull out the element vertically.
7. Replace the old element with a new element by following
the procedure in reverse. When reinstalling the element,
be sure to align the key to the slot of the element housing
to the element.
Warning! The operator must disconnect the power from the machine before proceeding.
NOTE: The glass tube is easily broken and can already be broken, be very careful.
