Instruction Manual
Page 12
7.0
Machine Specifications
CHAPTER 7
MACHINE SPECIFICATIONS
Principles of Operation
The T600 is a heat sealing machine which welds thermal plastic fabrics or films by Hot Air or Hot Wedge,
through applying pressure, consistent speed, and accurate temperature for perfectly sealing thermal plas-
tic materials.
Features
•Suitable
for multiple-sized tents, inflatable boats, banners, tarps, awnings, and etc.
•User Friendly HMI allows the operators to easily adjust the machine for a wide variety of
products.
•Auto-Control Temperature controller allows the system to accurately provide heat to the products
being produced.
•Dual Pedal Control allows for easy operation for extended periods of time with high efficiency.
•An automatic Auto Reverse function allows the machine to start and stop with a void free seam.
Technical Specifications
•Amp Rating
- 25amp at 230volt / 16amp at 400 volt
•Rated Power
- 4000 W
•Rated Voltage
- 230v AC, 50/60hz or 400v AC, 50/60hz
•Maximum Temperature
- 1350°F (730°C)
•General Air Pressure
- 120psi (8.3 bar)
•Machine Speed
- 3 ft/min to 80 ft/min (1 m/min to 25 m/min)
•Overall Dimensions
- 120in x 26in x 68in (3048mm x 660mm x 1727mm)
•Seal Width
- 5mm to 50 mm
•Maximum Noise
- 70 dbA
•Net Weight
- 1250lbs (566g)
•Electrical Document Number
- The documentation number is the serial number of the machine.
This number is located on the serial tag on the machine.
