Instruction Manual
Page 18
CHAPTER 8
MAINTENANCE
8.0
Maintenance
Tightening/Oiling Chains
The Miller Weldmaster T600 has several chains that are used to drive
weld rollers and puller rollers. Although not a high maintenance item,
chains should be inspected once a year to ensure there is not exces-
sive corrosion, rust, or dirt. Also inspect for any looseness or slack.
If needed, lubricate chains once a year with 80w – 90w gear oil.
1. Turn the circuit breaker to the off position.
2. Disconnect the power cord from the power supply. If the
power cord is hard wired, shut the power supply off at
the junction box.
3. Remove the cover on the end cabinet and inspect the
chains. Perform any maintenance to the chains as needed.
4. Remove the end caps on the lower beam and inspect the
chains. Perform any maintenance to the chains as needed.
5. Remove the out puller cover and weld roller upper unit
covers. Perform any maintenance to the chains as needed.
