Instruction Manual
Page 14
7.0
Machine Specifications
CHAPTER 7
MACHINE SPECIFICATIONS
Pneumatic System
•
Pressure Adjustment Regulator:
Filters out water and dirt in the air. The Pressure Adjusting
regulator, regulates the pressure to the machine. Increase the pressure by rotating clock-
wise, and decrease the value by rotating counter-clockwise.
•
Solenoid Valve:
Controls the actions of the Air Cylinders.
•
Pressure Gauge:
Used for displaying the pressure setting. The Upper Weld Roller
gauge is used for displaying the pressure setting of the Upper Weld Roller.
•
Air Cylinder:
The upper unit/puller Air Cylinders are used for opening and closing the weld
roller and puller roller. The heat system cylinder controls swing-in and swing-out of the heat
system.
•Puller Pressure Limit Control:
Reference page 21 for adjustment procedure.
Other
•
Power Supply Circuit Breaker:
Used for the protective control of the General Power Supply
of the complete machine.
•Right Pedal Switch:
It controls the lifting of the weld roller, and the opening and closing of
the weld rollers and puller (if the puller switch is on).
•
Left Pedal Switch:
Controls the starting and stopping of the seaming operation.
