8age 9 of 18 rev 1.00 091220 Millennia Media HV-316
Ælogic Operation
Millennia’s
Ælogic remote control software is
straightforward to operate. Here is an in-depth
description of the available functions of the GUI.
Refer to Appendix for a list of keyboard shortcuts.
Unit Status Window
–
The example screen above
shows a Unit Status window in which seven HV-316
units (112 channels) are connected to the remote
network. The Unit Status window displays an icon of
each HV-316 unit on the network. The status of each
HV-316
is represented by its icon’s color code, as
follows:
Red Icon
–
“Unit
ID Has a Conflict with Another
Unit
”
. If two or more HV-316s share the same Unit
ID number or IP address, their icons will turn red,
and will show identical IDs or IP addresses until the
conflict is resolved.
Setting a Unit ID or IP address must be done locally
on each HV-316. Other errors could also cause a red
icon, such as over-temperature, power supply out of
range, other networking errors, etc.
Green Icon
–
“
Functioning Normally
”
. Remote unit
functioning normally.
Flashing Green Icon
–
HV-3R only.
“
Functioning
Normally, Local
Mode”
. Remote unit is functioning
normally but is in the local mode.
HV-3R only. If the unit is in Local mode when Ælogic
is started, it won’t appea
r. Be sure to change the
unit to Remote mode so the software can recognize
the HV-3R.
Purple Icon
–
“
Unit ID Is
Offline”
. A unit used to
be connected to the network and set to this Unit ID.
The unit is missing from the network. It was either
turned off or the Ethernet was disconnected or both.
Flashing Blue Icon
–
“Redundant Power Supply
failure”. If redundant power supplies are used,
indicates a Power Supply failure.
Gray Icon
–
“Unit
ID Is
Inactive”
. No unit is
connected to the network and set to this Unit ID.
Unit Status Dialog
–
Double left mouse click on
any icon brings up that unit’s
Unit Status dialog box
displaying the following information:
1.
Unit Functionality
2.
48v Monitor
3.
24v Monitor
4.
5v Monitor
5.
3.3v Monitor
6.
Temperature
7.
MAC Address
8.
Firmware Version
9.
Output Format
10.
IP Address
11.
Split Gain Offset
Scene Window
Unit Status Window
Control Section
