Millennia Media HV-316 page 6 of 18
Getting Started
Millennia’s
Ælogic software (Windows only) is used to
control the unit and should be installed on your
computer before connecting the HV-316 to the
network. It can be downloaded at
Installing the Ælogic Software
–
Turn off virus
protection software before installing. Remember to
turn the protection software back on when finished.
You need to allow Ælogic all permissions to access
your network. Failing to do so will prevent the
software from seeing the Millennia Preamps
connected.
If you are using WiFi, turn it off and use the wired
Ethernet connection to be sure all the permissions
are applied to it so you connect the Millennia Preamp
directly to your computer to initialize its IP address.
Extract the zipped files and Open
The following screen will appear.
Click on more info.
Click on Run Anyway
Click on Next
Check Accept and click on Next
Select the location to save the file and click Next
Click on Install
Click on Yes
