Millennia Media HV-316 page 10 of 18
Overview
–
This is the default view. It expands
the channel control area to show multiple units.
Virtual switches are replaced by small virtual
LEDs. Link switch is replaced by link group
number only. Other attributes are shrunk to fit.
All functions remain accessible and adjustable
on the Overview Screen.
Above is a screen-shot of the OVERVIEW.
Control Section
Basic Navigation and Behavior
The channel controls are grouped into their
respective HV-316 8-channel Units. The screen
shot on the previous page, shows units #1
through #7. You can left-click on any unit icon
shown in the Unit Status window to immediately
bring that unit’s channel controls into the main
screen.
Note the scroll bar at the bottom of the screen.
It allows the user to quickly scroll to any unit in
the network. You can also move the Control
Section by using the Left and Right arrow keys
on the keyboard. Pressing an arrow key once
corresponds to scrolling in that direction by one
channel strip.
HV-3R only. Ælogic is always the master control
when the unit is in Remote Mode. Any changes
made in
to the unit’s front panel in
the Local
mode will be overwritten when the HV-3R is put
back into Remote Mode.
Control
Layout
The main control section, starting from the top
down, graphically represents these features:
1.
Unit Name
2.
Channel Number
3.
Polarity Invert Button
4.
Pad (20 dB Attenuator) Select Button
5.
48V Phantom Select Button
6.
Mute Select Button
7.
Gain fader
8.
Plasma-type Metering
9.
Channel Gain
10.
Split Gain Mode
11.
Safe
12.
Ribbon
13.
High Pass Filter
14.
Link Assignment
15.
Scribble Strip
Unit Naming and Unit Name Dialog Box
(right-click on unit name)
–
Each Unit
’s
name is
Overview
