EasyCUT
MM148-001
– Operator Manual
11
2.3. Placement
The EasyCUT unit can be positioned in its final place of use. Make sure it is firmly placed and the bench is
level.
During the installation, EasyCUT should not be connected to the main power supply.
Avoid to use EasyCUT in places where there are high levels of steam or dust in the air or
where it could be exposed directly to water.
Do not place objects in the area under the ionized air outlet at a distance below 100 mm
(4in) (see picture) as they could jeopardize the proper operation and performances of
EasyCUT.
2.3.1. Unit overview
The picture below shows the front view of the EasyCUT unit.
1. Fan
2. Ionizers
3. LED light
4. LED switch
5. Ionizers switch
6. Power cord outlet
4
1
6
5
3
2
