EasyCUT
MM148-001
– Operator Manual
16
3.2. Adjusting the air flow speed
It is possible to adjust the air speed by means of the tool for speed adjustment supplied with the instrument.
Insert the tool for speed adjustment in the slot and turn clockwise as shown in the picture.
Minimum speed: position 1 with blue filter
Maximum speed: position 4 without blue filter
If the minimum speed (position 1 with blue filter) is not enough to neutralize the electrostatic charge, remove
the blue filter.
1. Press in the top right corner of the fan (as shown in the picture):
2. Slide the fan grid to the left.
