10
3.
Connecting to the Network
Pre-Installation Requirements
You will need the following prior to installing the hardware:
•
PC or Workstation with 10/100BASE-TX Ethernet card or RS-232
serial port
: Your PC must have a standard Ethernet interface or Serial
port to connect to the Device.
•
Ethernet UTP cable with RJ-45 connector or DB-9 RS-232 Serial
cable:
Check if the cable and connectors work properly.
•
A power outlet: 100 to 240V AC at 50 to 60 Hz or DC power.
Make sure that the Device power is accessible and power cords can be
connected easily.
•
Dedicated power supply
: Use dedicated power circuits or power
conditioners to supply reliable electrical power to the network devices.
•
A dry cool place
: Keep the Device away from moisture. Avoid direct
sunlight, heat source, and high amounts of electromagnetic
interference, all of which will adversely affect the performance of the
Device.
•
Mounting tools:
If you intend to mount the device on a rack, make sure
you have all the tools, mounting brackets, screws.
Mounting the Device
The Raven Series Modular Media Converter System is suitable for use in
an office environment where it can be rack-mounted in standard EIA
19-inch racks or used in a standalone configuration.
Summary of Contents for Raven MIL-RCM16A
