14
Power On
Connect the power cord to the power socket on the rear panel of the
conversion system. Connect the other end of the cord to an appropriate
power outlet.
Press the power On/Off switch to the On position and check the power
indicator on the front panel to see if power is properly supplied.
Diagnostic Test
The system will automatically perform a diagnostic test once the
installation is completed and power is applied to the device.
When the Power LED is on for 4 seconds, the CPU Ready LED will begin
flashing, indicating the system is ready. If the CPU LED is a steady light,
the diagnostic test has failed. Contact MiLAN Technical Support for
assistance.
Summary of Contents for Raven MIL-RCM16A
