32
5-2-1. Home Page
The Home page screen displays the configuration of the Raven Series
Modular Media Converter System.
System Name
: An administratively assigned name of the managed unit
that can be modified in SNMP page.
System Location
: The physical location of this managed unit (e.g.,
laboratory, 3
rd
floor) that can be modified in SNMP page.
System Contact
: The contact person for this managed unit that can be
modified in SNMP page.
System Up Time
: The time since the managed unit was re-initialized is a
read only field.
IP Address
: The IP address of the managed unit that can be modified in
IP Config page. Default is 192.168.16.1.
Subnet Mask
: The subnet mask of the managed unit that can be modified
in IP Config page. Default is 255.255.255.0.
Default Gateway
: The default gateway of the managed unit that can be
modified in IP Config page. Default is 192.168.16.254.
MAC Address
: The MAC address of the managed unit is a read only
field.
Firmware Version
: The firmware version of the management unit is a
read only field. You can upgrade to the new firmware on-line if a new
version is released.
Note:
By default, IE4.0 does
not
allow Java Applets to open sockets. The
user must explicitly modify the browser setting to enable Java Applets to
use network ports. (See Appendix A for instructions to modify the setting).
Summary of Contents for Raven MIL-RCM16A
