6
Rear Panel
The 3-pronged power plug and power on/off switch are located at the Rear
Panel of the Raven Series chassis, as shown in Figure 2-6. The equipment
will work with AC in the range 100-240VAC, 50-60Hz (AC type power
supply) or DC power in the range 40.5 ~57.0 @ 20A (DC type power
supply).
The conversion system ships standard with one power module and one fan
module. An additional power module unit is optional for load sharing and
redundancy.
Note:
Redundant power modules must be the same type power supply.
AC power and DC power are not available in a single system.
Figure 2-6.
Rear Panel
Power Slot A ships with
either an AC or DC power
module.
Power Slot B ships with a fan
module standard or an optional
redundant power module.
Summary of Contents for Raven MIL-RCM16A
