35
5-2-3. IP Configuration
This screen enables the user to change the
IP
address, subnet mask and
default gateway of the managed node or change the user name and
password.
Enter a new IP address, subnet mask or default gateway in the
corresponding edit box and then Click
Apply
.
To change the
user
name or password for the managed node:
1. Click the "Change Password" checkbox.
2. Enter the user name in "Username" edit box.
3. Enter the same password in "Password" and "Confirm Password"
edit boxes.
4. Click the
Apply
button.
You must reboot the conversion system for new configuration settings to
take effect if any of the IP address, subnet mask or default gateway fields
have been changed.
Summary of Contents for Raven MIL-RCM16A
