AguaBot 5.0 Maintenance
Aguabot 5.0
M I L A G R O W
11
Clean Sensors
A. Wipe the sensor window & auto charging sensors with cleaning tool or a soft dry
B. Clean the charging contacts on self charging base.
C. Clean the vacuum inlet and cliff sensors as shown in figure A & C above.
cloth.
How to assemble the water tank trailing bar
A. Water Tank Bottom View
B. Water Tank Top View C. Robot Main Unit Bottom View
D. Mop Attachment on Water Tank
Water Outlet
1
2
3
4
Water Tank
Body Joint Points
Water Injection Hole
1
2
3
4
Take off the water tank from the box or the bottom of main unit.
Open the water injection hole as shown in figure 1 & 2 above and inject water. Close the water
injection hole.
Stick the mop to the right place as shown figure 3
Put the water tank on bottom of the main unit as shown in figure 4 by matching the relevant holes
(figure 'C') on the bottom of the main unit with protrusions on the water tank top (figure 'B')
1.
2.
3.
4.
Note: Make sure the mop does not have too much water to avoid wheels from slipping.
1
3
2
4
MILAGROW
Aguabot 5.0
MILAGROW
Aguabot 5.0
A.
B.
C.
Sensor Window
Cliff/Fall Sensors
Cliff/Fall Sensors
Auto Charging Sensors
Auto Charging Sensors
Vacuum Inlet
Vacuum Inlet
