AguaBot 5.0 Operations
Aguabot 5.0
M I L A G R O W
Press CLEAN on the robot or remote to start auto
cleaning mode
Note: The robot will clean the area and adjust its
cleaning routine according to its environment.
Place the robot main unit near the dirty area. Press
SPOT to start cleaning and press CLEAN to stop.
Note: Spot cleaning makes the robot spend more
time cleaning a specific dirty area. Spot cleaning
mode will stop within 2 minutes. After that press the
Clean Button on the Robot or the AUTO button on
Remote Control to Start the robot again
Place the robot against a wall or against any large
object Press EDGE on the remote unit to start edge
cleaning mode; press CLEAN again on the Robot or
Power button on the remote,to stop.
Cleaning Modes
Auto Cleaning Mode
Spot Cleaning Mode
Edge Cleaning
9
3.
2.
1.
Note: When the robot detects an obstacle, it will use its side brushes to clean the
sides. If Robot is working in Auto mode & it bumps into the wall or an edge more than
30 times then it will go into the edge cleaning mode for 20 minutes or till the wall or
the edge ends. It will not detect edges between 5.5 cm to 8.8 cm height.
Auto
