AguaBot 5.0 Operations
Aguabot 5.0
M I L A G R O W
Sleep Mode
The robot will go into sleep mode if it does not receive any
commands for 20 seconds.
Note: Turn off the power switch if you are not going to use
the robot for a long period of time.
Scheduling
Y
ou can schedule the AguaBot to do the cleaning at a pre-defined time every day for
upto 5 hours. There is no real time clock setting function. You can set the scheduled
cleaning time (i.e. delay time) in one hour intervals from current time on your clock. Time
delay can be set up to 5 hours. For example, if it is 9:00AM on your clock, you can set
4:00 hr delay time on the robot, and the robot will start cleaning after 4 hours which is
1:00 PM.
When scheduling the time ensure that the AguaBot automatic delay start is set at-least
4hours ahead to allow sufficient time for completely charging the battery.
1.
2.
3.
4.
Turn on the cleaner.
Press“
”button on the remote control to enter into delay cleaning time setting;
then press“
”or“
”button to choose delay cleaning hours (1 means start after 1
hours after the current time,........5 means start after 5 hours after the current time).
After choosing the delay cleaning hour, press“
”button to save and finish the
scheduling.
To cancel scheduling, press again“
”button and then press“ ”button; the delay
time will be erased.
When Scheduling ensure that the AguaBot automatic delay start time is set at least
4 hours ahead to allow sufficient time for completely charging the battery.
Once the scheduled cleaning cycle is over, and robot has had a full charge (I.e. LED
display screen shows "1 2 3 4 5") you can press "clean" button on the LED display
screen or "Auto" button on the remote control to start the robot for another cycle of
cleaning in between scheduled cleaning cycles.
8
2
