background image

Mila

Welcome to Mila! This manual provides specific operating instructions for your model. Use the 
unit only as instructed in this user manual. These instructions are not meant to cover every possi-
ble condition and situation that may occur. Please practice caution and common sense when 
installing, operating, and maintaining any unit. 

USA & CANADA: 

This unit has a polarized plug 

(one blade is wider than the other). To reduce 
the risk of electric shock, this plug is intended to 
fit in a polarized outlet only one way. If the plug 
does not fit fully in the outlet, reverse the plug. If 
it still does not fit, contact a qualified electrician. 
Do not attempt to defeat this safety feature.

CHILDREN AND VULNERABLE PEOPLE SAFETY
WARNING!

 Risk of suffocation, injury or perma-

nent disability.

This unit is not intended for use by persons 
(including children) with reduced physical, 
sensory or mental capabilities, or lack of 
experience and knowledge, unless they have 
been given supervision or instruction 
concerning use of the unit by a person 
responsible for their safety. Children should be 
supervised to ensure that they do not play with 
the unit. 

This unit can be used by children aged from 8 
years and above and persons with reduced 
physical, sensory or mental capabilities or lack 
of experience and knowledge if they have been 
given supervision or instruction concerning use 
of the unit in a safe way and understand the 
hazards involved. 

Children shall not play with the unit.

Cleaning and user maintenance shall not be 
made by children without supervision.

Children under 3 years of age should be kept 
away from the unit unless continuously 
supervised.
Keep all packaging away from children.

WARNING! 

 Avoid fire hazard or electric shock. 

Do not use an extension cord or an adaptor plug. 
Do not remove any prong from the power cord. 

This unit can be used in 50Hz or 60Hz power 
supply without any change. 

Do not store or use gasoline or other flammable 
vapors and liquids in the vicinity of this or any 
other unit. Read product labels for flammability 
and other warnings.

Do not let water or any other liquid or flammable 
detergent enter the unit to avoid electric shock 
and/or a fire hazard.

Do not disassemble the product.

Do not touch the fan blade when removing the 
filter.

If the supply cord is damaged, it must be 
replaced by the manufacturer, its service agent 
or similarly qualified persons in order to avoid a 
hazard.

Safety Information

2

Summary of Contents for Say hello to Mila




















Reviews: