background image

Quiet Mode

Housekeeping 

Mode

Deep Clean

Turndown 

Service

Light Sleeper

White Noise

Quarantine

NOTE: In Automagic Mode the fan speed cannot be changed manually.

Modes

In this mode, the unit will choose the fan 
speed automatically, based on your 
preferences, the indoor air quality level, 
detected pollutants in the room, and the 
outdoor air quality (this requires an 
Internet connection and location-sharing). 
This is the default mode each time your 
turn on your Mila. 

Select 

custom Automagic settings

 in the 

Mila app:

Automagic Mode

12

Reduce fan speeds 
to whisper-quiet 
levels when you’re 
in the room.

Snooze in peace 
and quiet with lights 
off, lower fan 
speeds, and 
controlled fan 
fluctuations.

Drift off to the 
calming rhythm of 
oscillating fans that 
clean while they 
soothe.

This one’s for the 
clean air freaks. Let 
Mila do whatever it 
takes to keep your 
room 100% particle 
free.

Let Mila deep-clean 
your room when no 
one is around.

Give your room a 
thorough airing out 
with a 20-minute 
blast. 

Activate an hour 
before bedtime to 
give your room a 
deep clean to 
reduce nighttime 
allergies.

Summary of Contents for Say hello to Mila




















Reviews: