Manual Mode
Modes
13
Tap the “Mode” button.
Tap the “+” button to
change the selected mode
to Manual.
Tap the “Mode” button
again to confirm the
selection.
1
2
3
In this mode, the fan speed can be
changed manually by touching the
minus (-) and plus (+) buttons to
increase or decrease fan speed.
Manual Mode begins with the fan
stopped (0 RPM) or 0.0 Air Changes
/ Hr (ACH).
The fan speed will change gradually
after a new fan speed is selected.
Each time the fan speed changes,
the timer at the top right of the
screen will recalculate the estimated
time to clean based on the Target
AQI shown. This timer will decrease
or increase as time passes and the
air quality changes.
Each time the fan speed is changed,
the value for “Target AQI” will be
updated and a new Time to Clean will
be calculated.
Target AQI is calculated based on
your set room size and the estimated
ACH.
It’s important to note that at lower
AQI levels, it can take longer to
clean. Additionally, if your Indoor AQI
increases, so will your Time to Clean.
This screen also presents the “Air
Changes / Hr” and the indoor
“Current AQI”.
To switch to manual mode
follow the next steps.
Summary of Contents for Say hello to Mila
Page 1: ...Mila Mila Air User Manual Say hello to ...
Page 19: ......
