The DLM-080 FUTURE Digital Recorder – User’s Manual
26.11.2004
8
3.3
MODIFICATION OF PARAMETERS IN THE SETUP MEMORY (THE
SETUP MODE)
The SETUP mode permits to edit the DLM-080 configuration parameters (as described in
Table 1).
The device will switch to the SET-UP mode after selecting the F00 special function. The
following will be displayed after selecting this function:
• word
CODE
in time display field
•
words
SET UP
in channel 1 and 2 display field
•
number
000
in channel 3 display field, and number
000
in channel 4 field
At this moment, by pressing the
keys in channel 3 and 4 display field,
enter access code to the SETUP memory (standard code is: 888 888).
Accept set values by pressing the
key.
In case if correct value is entered, the DLM-080 switches to the SETUP mode.
Word SETUP will be displayed, and:
• SETUP function number in channel 3 display field,
• SETUP value number in channel 4 display field.
Then take these steps:
• in order to modify function number press the
keys in channel 3 display field,
• in order to modify function value press the
keys in channel 3 display field.
3.3.1
SET UP memory reset and setting of initial parameters
In order to initialise the DLM-080 and reset the recording memory, take the following
steps (while remaining in the SETUP mode):
• press the
key and hold it until the 00:00 symbol is shown on the real-
time display; execution of this operation results in resetting of all configuration values, the
recording memory and preset standard values of the SETUP function.