The DLM-080 FUTURE Digital Recorder – User’s Manual
26.11.2004
19
INTERLOCK DISABLE
- press and hold the
key in the display field of channel no. 2
- press and hold the
key in the display field of channel no. 5
- release the
key in the display field of channel no. 2
- release the
key in the display field of channel no. 5
Word
OPEN.
will be displayed in the real-time display field
ATTENTION ! In case if keyboard interlock is on, pressing of any key results in word
CLOS.
being displayed in the real-time display field, and set values for all channels are
shown.
10.
EXAMPLES HOW TO CONFIGURE THE DLM-080
10.1
CHANNEL No. 5 AS THE PT100 MEASUREMENT INPUT
The
procedure:
1- set position of the A/D converter input type switch (back panel of the Recorder, the
switch in lower position)
1 2 3 4
ON
Ch5
2- turn on the Recorder
3- switch to the SETUP mode
- press the
key (a diode built-in in the key blinks)
- press the
key and hold it for approximately 3 sec.
(After 3 seconds the symbol
F-00
will be displayed in the real-time display field.)
