MikroTik RouterOS v2.9 Reference Manual Download Page 144

Page: 144 / 709

Routes, Equal Cost Multipath Routing, Policy
Routing

Document revision 2.3 (July 20, 2007, 13:21 GMT)

This document applies to MikroTik RouterOS V2.9

Table of Contents

Table of Contents

Summary
Specifications
Related Documents
Description

Routes

Description
Property Description
Notes
Example

Policy Rules

Property Description
Notes
Example
Static Equal Cost Multi-Path routing
Standard Policy-Based Routing with Failover

General Information

Summary

The following manual surveys the IP routes management, equal-cost multi-path (ECMP) routing
technique, and policy-based routing.

Specifications

Packages required: system
License required: level1
Home menu level: /ip route
Standards and Technologies:

IP (RFC 791)

Hardware usage: Not significant

Related Documents

•

IP Addresses and ARP

•

Filter

•

NAT

Page 130 of 695

Other trademarks and registred trademarks mentioned herein are properties of their respective owners.

Summary of Contents for RouterOS v2.9






































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RouterOS v2.9

Reviews:

Brands by name

Popular brands

MikroTik RouterOS v2.9, Reference Manual

Search results

Summary of Contents for RouterOS v2.9

Reviews:

Brands by name

Popular brands