users in the network 192.168.0.0/24. If Host A is downloading 2 Mibps, Host B gets 8 Mibps and
vice versa. There might be situations when both hosts want to use maximum bandwidth (10 Mibps),
then they will receive 5 Mibps each, the same goes for upload. This setup is also valid for more than
2 users.
At first, mark all traffic, coming from local network 192.168.0.0/24 with a mark users:
/ip firewall mangle add chain=forward src-address=192.168.0.0/24 \
action=mark-connection new-connection-mark=users-con
/ip firewall mangle add connection-mark=users-con action=mark-packet \
new-packet-mark=users chain=forward
Now we will add 2 new PCQ types. The first, called pcq-download will group all traffic by
destination address. As we will attach this queue type to the Local interface, it will create a
dynamic queue for each destination address (user) which is downloading to the network
192.168.0.0/24. The second type, called pcq-upload will group the traffic by source address. We
will attach this queue to the Public interface so it will make one dynamic queue for each user who
is uploading to Internet from the local network 192.168.0.0/24.
/queue type add name=pcq-download kind=pcq pcq-classifier=dst-address
/queue type add name=pcq-upload kind=pcq pcq-classifier=src-address
Finally, make a queue tree for download traffic:
/queue tree add name=Download parent=Local max-limit=10240000
/queue tree add parent=Download queue=pcq-download packet-mark=users
Page 436 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
