second; TZD - time zone in one of these forms: "+hh:mm", "+hhmm", "-hh:mm", "-hhmm"
Note that the received attributes override the default ones (set in the default profile), but if an
attribute is not received from RADIUS server, the default one is to be used.
Rate-Limit takes precedence over all other ways to specify data rate for the client. Ascend data rate
attributes are considered second; and WISPr attributes takes the last precedence.
Here are some Rate-Limit examples:
• 128k - rx-rate=128000, tx-rate=128000 (no bursts)
• 64k/128M - rx-rate=64000, tx-rate=128000000
• 64k 256k - rx/tx-rate=64000, rx/tx-burst-rate=256000, rx/tx-burst-threshold=64000,
rx/tx-burst-time=1s
• 64k/64k 256k/256k 128k/128k 10/10 - rx/tx-rate=64000, rx/tx-burst-rate=256000,
rx/tx-burst-threshold=128000, rx/tx-burst-time=10s
Accounting-Request
The accounting request carries the same attributes as Access Request, plus these ones:
• Acct-Status-Type - Start, Stop, or Interim-Update
• Acct-Authentic - either authenticated by the RADIUS or Local authority (PPPs only)
• Class - RADIUS server cookie, as received in Access-Accept
• Acct-Delay-Time - how long does the router try to send this Accounting-Request packet
Stop and Interim-Update Accounting-Request
Additionally to the accounting start request, the following messages will contain the following
attributes:
• Acct-Session-Time - connection uptime in seconds
• Acct-Input-Octets - bytes received from the client
• Acct-Input-Gigawords - 4G (2^32) bytes received from the client (bits 32..63, when bits 0..31
are delivered in Acct-Input-Octets)
• Acct-Input-Packets - nubmer of packets received from the client
• Acct-Output-Octets - bytes sent to the client
• Acct-Output-Gigawords - 4G (2^32) bytes sent to the client (bits 32..63, when bits 0..31 are
delivered in Acct-Output-Octets)
• Acct-Output-Packets - number of packets sent to the client
Stop Accounting-Request
These packets will, additionally to the Interim Update packets, have:
• Acct-Terminate-Cause - session termination cause (see RFC2866 ch. 5.10)
Change of Authorization
Page 388 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
