record-volume=0 ring-cadence="++-++--- ++-++---" agc-on-playback=no
agc-on-record=no aec=yes aec-tail-length=short aec-nlp-threshold=low
aec-attenuation-scaling=4 aec-attenuation-boost=0 software-aec=no
detect-cpt=yes
[admin@voip_gw] ip telephony voice-port linejack>
•
Add a voip voice port to the /ip telephony voice-port voip for each of the devices you want to
call, or want to receive calls from, i.e., (the IP telephone 10.0.0.224 and the Welltech IP
telephone 10.5.8.2):
[admin@voip_gw] ip telephony voice-port voip> add name=joe \
\... remote-address=10.0.0.224
[admin@voip_gw] ip telephony voice-port voip> add name=rob \
\... remote-address=10.5.8.2 prefered-codec=G.723.1-6.3k/hw
[admin@voip_gw] ip telephony voice-port voip> print
Flags: X - disabled, D - dynamic, R - registered
#
NAME
AUTODIAL REMOTE-ADDRESS
JITTER-BUFFER PREFERED-CODEC
SIL FAS
0
joe
10.0.0.224
100ms
none
no yes
1
rob
10.5.8.2
100ms
G.723.1-6.3k/hw no yes
[admin@voip_gw] ip telephony voice-port voip>
•
Add number records to the /ip telephony numbers, so you are able to make calls:
[admin@voip_gw] ip telephony numbers> add dst-pattern=31 voice-port=rob prefix=31
[admin@voip_gw] ip telephony numbers> add dst-pattern=33 voice-port=joe prefix=33
[admin@voip_gw] ip telephony numbers> add dst-pattern=1. voice-port=linejack1 \
\... prefix=1
[admin@voip_gw] ip telephony numbers> print
Flags: I - invalid, X - disabled, D - dynamic, R - registered
#
DST-PATTERN
VOICE-PORT
PREFIX
0
31
rob
31
1
33
joe
33
2
1.
linejack1
1
[admin@voip_gw] ip telephony numbers>
Making calls through the IP telephony gateway:
•
To dial the IP telephone 10.0.0.224 from the office PBX line, the extension number 19 should
be dialed, and, after the dial tone has been received, the number 33 should be entered. Thus,
the telephone [Joe] is ringed.
After establishing the voice connection with '33' (the call has been answered), the voice port
monitor shows:
[admin@voip_gw] ip telephony voice-port linejack> monitor linejack1 status:
connection port: line direction: port-to-ip line-status: plugged phone-number: 33
remote-party-name: linejack1 [10.0.0.224] codec: G.723.1-6.3k/hw duration: 1m46s
[admin@voip_gw] ip telephony voice-port linejack>
•
To dial the IP telephone 10.5.8.2 from the office PBX line, the extension number 19 should be
dialed, and, after the dial tone has been received, the number 31 should be entered.
Setting up the Welltech IP Telephone
Please follow the documentation from
www.welltech.com.tw
on how to set up the Welltech LAN
Phone 101. Here we give just brief recommendations:
1.
We recommend to upgrade the Welltech LAN Phone 101 with the latest application software.
Page 677 of 695
Copyright 1999-2007, MikroTik. All rights reserved. Mikrotik, RouterOS and RouterBOARD are trademarks of Mikrotikls SIA.
Other trademarks and registred trademarks mentioned herein are properties of their respective owners.
