MikroTik RouterOS v2.9 Page 522 Reference Manual Download

Page: 522 / 709

Configuration menus

• /ip hotspot - HotSpot servers on particular interfaces (one server per interface). HotSpot server

must be added in this menu in order for HotSpot system to work on an interface

• /ip hotspot profile - HotSpot server profiles. Settings, which affect login procedure for

HotSpot clients are configured here. More than one HotSpot servers may use the same profile

• /ip hotspot host - dynamic list of active network hosts on all HotSpot interfaces. Here you can

also find IP address bindings of the one-to-one NAT

• /ip hotspot ip-binding - rules for binding IP addresses to hosts on hotspot interfaces

• /ip hotspot service-port - address translation helpers for the one-to-one NAT

• /ip hotspot walled-garden - Walled Garden rules at HTTP level (DNS names, HTTP request

substrings)

• /ip hotspot walled-garden ip - Walled Garden rules at IP level (IP addresses, IP protocols)

• /ip hotspot user - local HotSpot system users

• /ip hotspot user profile - local HotSpot system users profiles (user groups)

• /ip hotspot active - dynamic list of all authenticated HotSpot users

• /ip hotspot cookie - dynamic list of all valid HTTP cookies

Question&Answer-Based Setup

Command name: /ip hotspot setup

Command Description

address pool of network ( name ) - IP address pool for the HotSpot network

dns name ( text ) - DNS domain name of the HotSpot gateway (will be statically configured on the
local DNS proxy

dns servers ( IP address | IP address ) - DNS servers for HotSpot clients

hotspot interface ( name ) - interface to run HotSpot on

ip address of smtp server ( IP address ; default: 0.0.0.0 ) - IP address of the SMTP server to
redirect SMTP requests (TCP port 25) to

• 0.0.0.0 - no redirect

local address of network ( IP address ; default: 10.5.50.1/24 ) - HotSpot gateway address for the
interface

masquerade network ( yes | no ; default: yes ) - whether to masquerade the HotSpot network

name of local hotspot user ( text ; default: admin ) - username of one automatically created user

passphrase ( text ) - the passphrase of the certificate you are importing

password for the user ( text ) - password for the automatically created user

select certificate ( name | none | import-other-certificate ) - choose SSL certificate from the list of
the imported certificates

• none - do not use SSL

• import-other-certificate - setup the certificates not imported yet, and ask this question again

Page 508 of 695

Other trademarks and registred trademarks mentioned herein are properties of their respective owners.

Summary of Contents for RouterOS v2.9






































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for RouterOS v2.9

Reviews:

Related manuals for RouterOS v2.9

Brands by name

Popular brands

MikroTik RouterOS v2.9, Reference Manual

Search results

Summary of Contents for RouterOS v2.9

Reviews:

Related manuals for RouterOS v2.9

Brands by name

Popular brands