If you wish to ignore any periods then simply enter "0.00".
Please note due to the nature of the pre-programmed boiler software there may be a
half-hour delay in the CH system start and off times.
This period can be offset by adjusting the on and off times.
e.g. if you leave the house at 10:00 then enter 9:30 and if you are returning at 12:.30
enter 12.00.
Always confirm the times with the "MENU" button.
Programming all periods - note: you may ignore any blocks by entering 00:00 with the
exception of “SWITCH ON 1” and “SWITCH OFF 1” for which you must enter a real time.
After you have programmed all three on and off period’s press the "+" button to arrive at
“<-BACK” Press the MENU button and you will arrive at TUESDAY.
Press the MENU button again and you will arrive at COPY “MO -> TU”
You can now copy the previous days program onto the next day e.g. Mondays times to
Tuesday by pressing MENU or alternatively program in new times by pressing “+” button
and repeating the process described in the previous section.
To copy the previous days program Press the "MENU" button, you arrive at:
“MON -> TUESDAY”
Press the "MENU" button once to copy and the display will change to “WEDNESDAY”.
Press the "MENU" button, you arrive at:
“TU -> WEDNESDAY”
Press the "MENU" button once to copy and the display will change to “THURSDAY”
Repeat the process until all day have been copied or changed as required and you
arrive at <- BACK.
To exit this second submenu, from <-BACK press "MENU" button once and you will
arrive at SET HW TIMER
From here you can either continue to programme the unit or return to the operating
display menu by pressing “+” repeatedly until you arrive at <-BACK then exit by pressing
menu.
26.5 Setting the HW timer
This programme enables the setting of 3 time blocks (3 start and 3 end times) per day
(24 hours) for higher and lower temperatures of the supply of tap water.
This menu has two submenus:
a. the days of the week
