Miele WXD 160 Operating And Installation Instructions Download Page 21

Page: 21 / 88

3. Loading the washing machine

Opening the door



Take hold of the door and pull it
open.

Check the drum for pets or foreign
objects before loading it with
laundry.

The most efficient use of energy and
water is achieved when a full load is
washed. However, do not overload as
this reduces cleaning efficiency and
causes creasing.



Unfold the laundry and load loosely in
the drum.

Mixing both large and small items
gives better wash results and also
helps distribute the load evenly during
spinning.

Tip:

Please note the maximum load for

different wash programs.

Closing the door



Make sure that no items are caught
between the door and the seal.



Shut the door with a gentle swing.

Summary of Contents for WXD 160

























































































Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands

Miele WXD 160, Operating And Installation Instructions

Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands