Miele WXD 160 Operating And Installation Instructions Download Page 23

Page: 23 / 88

5. Add detergent

Detergent dispenser drawer

This washing machine requires high
efficiency detergent. Adhere strictly to
the dispensing amounts supplied by the
detergent manufacturer. The detergents
must be marked with the following
label:

Filling with detergent



Pull out the detergent drawer and add
detergents to the compartments.





Chlorine bleach for removing
stains



Detergent for the main wash




Fabric softener, liquid starch, or
capsules

Using chlorine bleach



Damage due to chlorine bleach.

Textiles may be discolored or their
fibers damaged.
Only use chlorine bleach on suitable
textiles.

Chlorination

must

be activated in the

programmable functions before
chlorine bleach is first used.

Bleach may be used in the following
programs:

- Normal

- Sanitize

- Dress Shirts

- Extra White

Dispensing bleach

Follow the manufacturer's
instructions on the packaging.



Pour

max. 1/4 cup (60 ml)

of bleach

into the





chamber.

The bleach is added automatically
10 minutes before the end of the main
wash.

Summary of Contents for WXD 160

























































































Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands

Miele WXD 160, Operating And Installation Instructions

Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands