Miele WXD 160 Operating And Installation Instructions Download Page 8

Page: 8 / 88

IMPORTANT SAFETY INSTRUCTIONS

Use



Do not allow children to play on or in the appliance. Close

supervision is necessary when the appliance is used near children.



The drum door glass will be hot when washing at very high

temperatures. Do not touch the glass. Danger of burns! Keep
children away from the washer when in use.



Only use the washing machine to wash items which are specified

by the manufacturer to be machine washable on the fabric care
label. Any other applications may be dangerous.



Do not wash articles that have been previously cleaned, washed,

soaked or spotted with gasoline, dry-cleaning solvents or other
flammable substances. These articles give off vapors that could
ignite or explode. Do not add these items to the wash load.



Do not add gasoline, dry-cleaning solvents, or other flammable or

explosive substances to the wash water. These substances give off
vapors which could ignite or explode.



Do not use cleaning solvents on or near the machine or the

controls. Contact with cleaning solvents will damage the surface..



Do not reach into the appliance if the drum is moving.



Do not tamper with the controls.

SAVE THESE INSTRUCTIONS

Summary of Contents for WXD 160

























































































Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands

Miele WXD 160, Operating And Installation Instructions

Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands