Miele WXD 160 Operating And Installation Instructions Download Page 16

Page: 16 / 88

Before using for the first time

1. Removing the shipping
struts



Damage resulting from failure to

remove the shipping struts.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as
described in “Installation and
connection”.

2. Setting up Miele@home

There are 2 ways of connecting:

1. via the Miele app (default)

2. via WPS

To do so, you will need a WPS-
compatible router.

Logging in via the Miele app



Turn the program selector to the

MobileStart



program.



appears on the time display and

the timeout starts to count down from
10 minutes. The Miele app will guide
you through the remaining steps.

When you have successfully connected,



will appear on the time display.

Logging in via WPS



Turn the program selector to the

MobileStart



program.



Touch the



sensor button until



appears on the time display and a
short keypad tone sounds.

The timeout then starts to count down
from 2 minutes on the time display.



Activate the WPS function on your
router within 2 minutes.

When you have successfully connected,



will appear on the time display.

Tip:

If the connection has not been set

up when the timeout has finished
counting down, repeat the process.

Summary of Contents for WXD 160

























































































Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands

Miele WXD 160, Operating And Installation Instructions

Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands