Miele WXD 160 Operating And Installation Instructions Download Page 66

Page: 66 / 88

Installation

*INSTALLATION*

Additional installation
requirements

The washing machine must be
installed in accordance with the
relevant local regulations.



Damage resulting from failure to

remove the shipping struts.
Failure to remove the shipping struts
can result in damage to the washing
machine and to adjacent cabinetry or
appliances.
Remove the shipping struts as
described in “Installation and
connection”.

Installing under a countertop



Risk of electric shock due to

exposed cables
There is a risk of coming into contact
with live parts while the lid is
removed.
Do not remove the washing machine
lid.

This washing machine (with lid intact)
can be pushed under a countertop if
there is space to do so.

Setting up the cabinet

Summary of Contents for WXD 160

























































































Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands

Miele WXD 160, Operating And Installation Instructions

Search results

Summary of Contents for WXD 160

Reviews:

Related manuals for WXD 160

Brands by name

Popular brands