Miele WCG 360 Operating Instructions Manual Download Page 41

Page: 41 / 100

Programme chart

Programmes accessed via Further programmes/



on the pro-

gramme selector

Outerwear

Cold to 40 °C

Max. load 2.5 kg

Items

Performance outerwear (e.g. jackets and trousers) made from mem-
brane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER®,
etc.

Tip

- Zip up or close any jackets with Velcro before washing.

- Do not use fabric conditioner.

- If required, these items can also be re-proofed using the

Proof-

ing

programme. Proofing after each wash cycle is not recommen-

ded.

Express 20

Cold to 40 °C

Max. load 3.5 kg

Items

Cotton garments that have hardly been worn or are only very lightly
soiled

Tip

The

Quick

Extra is activated automatically.

Sportswear

Cold to 60 °C

Max. load 3.0 kg

Items

Sportswear such as singlets and leggings as well as microfibre and
fleece garments

Tip

- Do not use fabric conditioner

- Follow the instructions on the care label

Automatic plus

Cold to 40 °C

Max. load 6.0 kg

Items

Mixed loads of garments sorted according to colour which are suit-
able for the

Cottons

and

Minimum iron

programmes

Tip

The wash parameters (e.g. water level, wash rhythm and spin speed)
are adjusted automatically in this programme to ensure the best
possible care and wash result for each item.

Summary of Contents for WCG 360





































































































Search results

Summary of Contents for WCG 360

Reviews:

Related manuals for WCG 360

Brands by name

Popular brands

Miele WCG 360, Operating Instructions Manual

Search results

Summary of Contents for WCG 360

Reviews:

Related manuals for WCG 360

Brands by name

Popular brands