Miele WCG 360 Operating Instructions Manual Download Page 17

Page: 17 / 100

Before using for the first time



Damage resulting from incorrect

installation and connection.
Installing and connecting the wash-
ing machine incorrectly will cause
serious property damage.
See “Installation”.

Protective foil and stickers re-
moval



Remove:

- The protective foil from the door

- Any stickers from the front and the lid

Please do not remove any labels
(e.g. the data plate) which are visible
when you open the door.

This washing machine has undergone
a complete functional test at the fact-
ory and there will be some residual
water in the drum from this process.

Remove the drain hose elbow
from the drum

An elbow piece for the drain hose is
stored in the drum.



Reach under the door grip and pull
the door open.



Remove the elbow piece.



Shut the door with a gentle swing.

Summary of Contents for WCG 360





































































































Search results

Summary of Contents for WCG 360

Reviews:

Related manuals for WCG 360

Brands by name

Popular brands

Miele WCG 360, Operating Instructions Manual

Search results

Summary of Contents for WCG 360

Reviews:

Related manuals for WCG 360

Brands by name

Popular brands