Miele TMG 440 WP Operating Instructions Manual Download Page 26

Page: 26 / 84

3. Select a programme and start it

Select any options or delay

start (if required)

Options



Press a button.

The button will light up when the option

is selected.
An option can only be selected when

the load indication has gone out in the

display.
Not all options can be combined or can

be selected/deselected: see "Options".

Please see "Options" for further

information.

Delay start



Press the

Delay start

button to select

delay start.

Please see "Delay start" for more

information.

Start the programme.



Press the flashing

Start/Stop

button.

The

Start/Stop

button will now light up

constantly.

Drying

and the programme duration will

light up in the display. The drying level

reached will light up instead of

Drying

later on, during programmes with a

selectable drying level.
The

Perfect Dry

indicator will only flash/

light up with programmes with

selectable drying levels (see also

"Operating the tumble dryer").

Cooling down

will light up in the display

shortly before the end of the

programme. The laundry will be cooled

down, however the programme is not

yet finished.

Summary of Contents for TMG 440 WP





















































































Search results

Summary of Contents for TMG 440 WP

Reviews:

Related manuals for TMG 440 WP

Brands by name

Popular brands

Miele TMG 440 WP, Operating Instructions Manual

Search results

Summary of Contents for TMG 440 WP

Reviews:

Related manuals for TMG 440 WP

Brands by name

Popular brands