Connection to a sink drain outlet
The drain hose can be connected
directly to a sink drain outlet.
^
Remove the following from the back
of the dryer at the bottom:
Adapter
1
and hose clip
3
behind it.
^
Fit adapter
1
to the sink drain outlet
using nut
2
.
If this nut has a flat disc sealing it you
should take the disc out first.
Important: if this nut has a washer or
seal in it this must not be removed!
^
Attach the end of the hose to adapter
1
.
^
Use a screwdriver to tighten hose
clip
3
up close to the nut.
If you no longer wish to use an
external condensed water outlet
,
Do not
push the drain hose
back into the dryer. Doing this could
cause it to become kinked and
damaged in the dryer.
^
Loop the drain hose up.
^
Use a suitable cable tie to secure the
looped hose to the back of the dryer,
or simply lay the looped hose behind
the dryer.
^
Attach the open end of the drain
hose back onto the holder at the
back of the dryer at the top (see
holder
2
in "Pulling out the drain
hose").
Installation
41
Summary of Contents for T 4452 C
Page 46: ...46 ...
Page 47: ...Programmable functions for changing standard settings 47 ...
Page 54: ...54 ...
Page 55: ...55 ...
