Miele PWM 908, Operating And Installation Instructions

Page: 87 / 104

Supervisor level
87
Clock display
After selecting the clock format, you
can set the time of day.
Clock format
– 24h clock (factory default)
– 12h clock
– No clock
Set
– The time of day can be set.
Date
The date can be set after selecting the
date format.
Date format
– DD.MM.YYYY (factory default)
– YYYY.MM.DD
– MM.DD.YYYY
Date
– The date can be set.
Volume
The volume for various sounds can be
changed.
– Finish tone
– Keypad tone
– Welcome tone
It can be set to one of 7 different
levels or switched off altogether.
– Fault alarm
The fault alarm can be activated or
deactivated.
Visibility parameters
Various parameters, such as the tem-
perature, spin speed, Extras, etc., are
displayed when a programme is selec-
ted. You can decide which parameters
should not be displayed. These para-
meters can then not be edited during
programme selection.
Factory default: all parameters are vis-
ible (marked in orange)
Sort Extras
Under the setting
Visibility parameters
,
Sort Extras appears in the bottom line.
Touch the sensor control to change
the sequence of Extras (see “Arranging
programmes” under “Supervisor
level”).