background image

Warning and safety instructions

8

 

This washing machine can only be used by people with reduced

physical, sensory or mental capabilities, or lack of experience or
knowledge, if they are supervised whilst using it or have been shown
how to use it in a safe way and understand and recognise the con-
sequences of incorrect operation.

 

Children under the age of 8 must not be allowed near the washing

machine unless they are constantly supervised.

 

Children over the age of 8 may only use the washing machine

without supervision if its operation has been clearly explained to
them and they are able to use it safely. Children must be able to un-
derstand and recognise the possible dangers caused by incorrect
operation.

 

Children may not carry out cleaning or maintenance on the wash-

ing machine unsupervised.

 

Always supervise any children in the vicinity of the washing ma-

chine. Never allow children to play with the washing machine.

 

Disinfection programmes must not be interrupted, as this can

have a limiting effect on the disinfection result. It is the operator's re-
sponsibility to ensure that the standard of disinfection in thermal as
well as chemo thermal procedures is maintained by carrying out suit-
able validation tests.

Summary of Contents for PWM 908









































































































Reviews: