Miele PWM 908 Operating And Installation Instructions Download Page 34

Page: 34 / 104

Timer

Before the programme starts, the timer
can be used to select a programme
start time or programme end time.

Setting the timer



Touch the

 Timer

sensor control.



Select the option

Finish at

Start in

Start at



Set the hours and the minutes with
the

sensor control.

Changing the timer

The selected delay start time period can
be changed before the programme
start.



Touch the







sensor con-

trol.



If required, change the specified time
and confirm with the

sensor con-

trol.

Deleting the timer

The selected delay start period can be
cancelled before the programme starts.



Touch the







sensor con-

trol.

The selected delay start period will ap-
pear in the display.



Touch the

Delete

sensor control.



Confirm with the

sensor control.

The selected delay start period is de-
leted.

Starting the timer



Touch the

Start/Stop

sensor control.

The door will lock and the time until the
programme starts will appear in the dis-
play.

After the programme has started, the
selected delay start period can only be
changed or cancelled by interrupting
the programme.

The programme can now be started at
any time.



Touch the

Start immediately

sensor

control.

Summary of Contents for PWM 908









































































































Search results

Summary of Contents for PWM 908

Reviews:

Related manuals for PWM 908

Brands by name

Popular brands

Miele PWM 908, Operating And Installation Instructions

Search results

Summary of Contents for PWM 908

Reviews:

Related manuals for PWM 908

Brands by name

Popular brands