Miele PW 811, Operating And Installation Instructions

Page: 94 / 184

Programme chart
94
Mops intensive 90 °C Fill ratio/Load
size
Fabric Cotton, viscose, polyester and microfibre mops
1:10
PW 811 - 11 kg
PW 814 - 14 kg
PW 818 - 18 kg
For number,
see
"Mops per load"
chart
Programme
sequence Pre-spin
Pre-rinse
+
 2nd pre-rinse, optional
Pre-wash 30°C
Main wash 90 °C, Cool down can be selected
3 rinses
Final spin
Mops first wash 60 °C / 90 °C
Fabric For washing new mops
Programme
sequence Main wash 60 °C / 90 °C, Cool down can be
selected
2 rinses
Final spin
With the Mops . . . + finish programme the mops are ready to use and already
impregnated with detergent and disinfectant. To achieve this, following washing or
disinfection there is a finishing stage and then a final spin. The desired moisture of the
mops can be varied by programming different spin blocks at the end.
Detergent amounts must be set on site and the standard of disinfection must be checked.
The Finish mops programme is suitable for the subsequent finishing of clean and dry
mops. A disinfecting agent is applied during finishing.
Detergent amounts must be set on site and the standard of disinfection must be checked.
Mop load size (cotton)
Mop
size/
weight 40 cm
190 g/
mop 50 cm
220 g/
mop 60 cm
280 g/
mop 80 cm
360 g/
mop 110 cm
510 g/
mop 130 cm
610 g/
mop 160 cm
720 g/
mop
PW 811 Qty. 58 Qty. 50 Qty. 39 Qty. 31 Qty. 22 Qty. 18 Qty. 15
PW 814 Qty. 74 Qty. 64 Qty. 50 Qty. 39 Qty. 27 Qty. 23 Qty. 19
PW 818 Qty. 95 Qty. 82 Qty. 64 Qty. 50 Qty. 35 Qty. 30 Qty. 25
Useful tip: When using microfibre mops, the load size is higher due to the lower mop
weight.
Mop load size (microfibre)
Mop size/weight 40 cm
120 g/mop 50 cm
170 g/mop
PW 811 Qty. 92 Qty. 65
PW 814 Qty. 117 Qty. 82
PW 818 Qty. 150 Qty. 106