Programming
172
During data transfer the following appears in the display:
Dispensing
Data to control unit
Useful tip:
If not all dispensing data was able to be copied from the
card to the controls, the following message will appear:
Dispensing
Data to control unit
Insufficient memory
Useful tip:
If copying is not possible as described above, the
following appears in the display for 5 minutes:
Dispensing
Data to control unit
Data transfer not possible
Programme
With this menu option one or more programmes can be copied from
the card to the controls.
Useful tip:
Existing programmes in the controls will be overwritten.
Select the "Programme" menu option.
After selection, the following appears in the display:
Data to control unit
:
Programme
13:40 10.05.15
Programme
Press the multifunction selector to confirm your selection.
The following will appear in the display:
1
Cottons hygiene
90
2
Cottons universal
60
Data to control unit
Programme
1-999
°C
°C
Option:
– All programmes are available on the card
Select or deselect programmes by pressing the multifunction
selector.
Summary of Contents for PW 811
Page 183: ...183 ...
