manualshive.com logo in svg

Miele PT 7137 WP Vario, Operating And Installation Instructions

Share
Download
Miele PT 7137 WP Vario Operating And Installation Instructions Download Page 7

Warning and Safety instructions

7

Technical safety

 

Before setting up the tumble dryer, check it for any externally vis-

ible damage.
Do not install or use a damaged tumble dryer.

 

Do not make any alterations to the tumble dryer, unless authorised

to do so by Miele.

 

Do not connect the tumble dryer to the mains electricity supply by

an extension lead. Extension leads are a fire hazard and do not guar-
antee the required safety of the tumble dryer.

 

The electrical safety of this tumble dryer can only be guaranteed

when correctly earthed. It is essential that this standard safety re-
quirement is met. If in any doubt, please have the household wiring
system inspected by a qualified electrician. Miele cannot be held li-
able for the consequences of an inadequate earthing system (e.g.
electric shock).

 

Unauthorised repairs could result in unforeseen dangers for the

user, for which Miele cannot accept liability. Repairs should only be
undertaken by a Miele approved service technician, otherwise any
subsequent damage will not be covered by the guarantee. Ensure
current is not supplied to the tumble dryer until after maintenance or
repair work has been carried out.

Summary of Contents for PT 7137 WP Vario





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands