manualshive.com logo in svg

Miele PT 7137 WP Vario, Operating And Installation Instructions

Share
Download
Miele PT 7137 WP Vario Operating And Installation Instructions Download Page 44

Problem solving guide

44

Problem

Cause and remedy

The interior drum light-
ing does not come on

The lighting switches off automatically (to save en-
ergy).

Switch the dryer off and then on again.

The lamp needs changing. Change the lamp as
described at the end of this section.

Interruption to the
power supply

No obvious cause.

Once power has been restored, switch the dryer
back on using the 

 button.

Confirm with the 

OK

 button.

The programme does
not start and the display
is dark.

There is no power to the dryer.

Is the dryer switched on?

Is the door closed properly?

Has the fuse or circuit breaker tripped?

The dryer switches off automatically after 15 minutes
if no further selection is made.

Switch the dryer on.

When the power comes back on after a power cut,
confirm with 

OK

 and start the programme again.

The display is dark and
the Start button is flash-
ing slowly.

The display has switched off automatically to save
energy (Standby mode).

The display will light up when one of the buttons is
pressed.

The display is in a dif-
ferent language.

A different language has been selected.

Set the language you want. The flag symbol 

 will

guide you.

The Start button flashes
when a programme is
being selected.

The flashing indicates that a programme can be star-
ted.

Once the programme has been started, the Start
button stops flashing and lights up constantly.

Summary of Contents for PT 7137 WP Vario





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands