manualshive.com logo in svg

Miele PT 7137 WP Vario, Operating And Installation Instructions

Share
Download
Miele PT 7137 WP Vario Operating And Installation Instructions Download Page 18

Operating the tumble dryer

18

Programme selection menu

Back

Cottons

Minimum iron

Woollens

Programme
selection

You can use the multi-function selector to select any pro-
gramme. The highlighting will move up or down depending on
the direction the multi-function selector is turned in.

The 

 

 arrows on the right of the display, indicate further

options.

Pressing the multi-function selector takes you to the main
menu of the programme selected.

Drying programme main menu

Cottons

Normal

Back

Duration

Timer

h

Save

G-tumble

1:30

Turn the multi-function selector to select either the "Drying
level" or the "Programme".
The selected option is highlighted. Pressing the multi-function
selector selects the highlighted option and opens the relevant
sub-menu.

The sub-menus 

Low temperature

 and 

Timer

 can be accessed

by pressing the short cut button directly below them.

To go back to the entry menu press short cut button 

 be-

low the word 

Back

.

Alternatively, you can also highlight and confirm all options by
just using the multi-function selector.

Settings menu 

The 

Settings

 menu is used to alter the washing machine's

electronics to suit different requirements. See "Settings menu"
in the separate booklet "Commissioning, Programme chart
and Settings" for more details.

Summary of Contents for PT 7137 WP Vario





























































Reviews:

No comments

Brands by name

Popular brands

Load more brands