Short instructions
24
Changing the programme se-
quence
Once drying is in progress, you can
press one of the short cut buttons:
–
Button
Timer
to call up the cur-
rent time of day and the estimated
end time of the programme.
–
Button
Save
to save the current
programme as a favourite.
–
Button
Cancel
to cancel the
current programme. This only applies
to machines with a payment system,
if a programme can be cancelled
without the loss of credit.
See section "Changing the programme
sequence" for further information about
the following:
– Payment system
– Changing a programme once it has
started
– Cancelling the current programme
– Adding or removing laundry after a
programme has started
– Interruption to the power supply
– Time remaining
Programme duration/ Estim-
ated time remaining
When a programme is selected, the es-
timated duration will appear in the dis-
play. Please be aware that it is only an
estimate!
The following factors all affect the es-
timated time remaining: residual mois-
ture content after spinning; type of fab-
ric; size of load; room temperature; fluc-
tuations in power supply.
The electronics continually assess con-
ditions in the appliance and adjust the
estimated time remaining for a more ac-
curate reading. Because of this, the
time displayed can alter during the
course of a programme.
Before the end of a programme
In many programmes the heating phase
is followed by the cooling down phase:
Cooling down
will appear in the display.
The programme is not finished until the
cooling down phase has been com-
pleted.
Do not switch the dryer off before
the drying programme has finished. If
this is done, the laundry must be
hung up or spread out to cool it
down.
