background image

Options

47

FlexiTimer with EcoStart

With the FlexiTimer 

, you have three

options for starting the program using
delay start. The start or finish time of a
program can be delayed. This enables
you to benefit from cheaper electricity
rates at night using the 

EcoStart

 func-

tion.

When using the FlexiTimer function,
make sure that the detergent com-
partment is dry before adding deter-
gent. Wipe dry with a cloth if neces-
sary. If the compartment is wet,
cleaning agent can become lumpy
and stick to the dispenser, with the
result that it is not fully dispensed.

To prevent children coming into

contact with dishwasher detergent:
Do not fill the detergent dispenser

until just before starting the pro-
gram

, i.e., before you activate the

FlexiTimer with 

OK

.

Open the door.

Switch the dishwasher on with the 

button.

Select the desired program.

Press the 

 button.

The 

 indicator will light up.

You can use the 



 arrow buttons to

select the 

Start at

Finish at

EcoStart

, and

Back 

 functions.

Confirm selection of the function you
want with 

OK

.

The current time of day will appear and
the hour number pad will be high-
lighted.

You can now enter the time you want
using the 



 arrow buttons and con-

firm with 

OK

.

If, while you are setting the time, you do
not press any buttons for several sec-
onds, the display will revert to the previ-
ous menu. You will then have to enter
your settings again.

Summary of Contents for PG 8133 SCVi

































































































Reviews: